A concept of divergence angle of light beams (DALB) is proposed to analyze the depth of field (DOF) of a 3D light-field display system. The mathematical model between DOF and DALB is established, and the conclusion that DOF and DALB are inversely proportional is drawn. To reduce DALB and generate clear depth perception, a triple composite aspheric lens structure with a viewing angle of 100° is designed and experimentally demonstrated. The DALB-constrained 3D light-field display system significantly improves the clarity of 3D images and also performs well in imaging at a 3D scene with a DOF over 30 cm.

In the integral imaging light field display, the introduction of a diffractive optical element (DOE) can solve the problem of limited depth of field of the traditional lens. However, the strong aberration of the DOE significantly reduces the final display quality. Thus, herein, an end-to-end joint optimization method for optimizing DOE and aberration correction is proposed. The DOE model is established using thickness as the variable, and a deep learning network is built to preprocess the composite image loaded on the display panel. The simulation results show that the peak signal to noise ratio value of the optimized image increases by 8 dB, which confirms that the end-to-end joint optimization method can effectively reduce the aberration problem.

A holographic visualization of volume data based on adjustable ray to optical-wave conversion is presented. Computer-generated holograms are generated by emitting multiple rays to sample the volumetric field. Equal interval sampling, object light wave adjustment, and information composition are sequentially performed during the march of rays. The program is accelerated in parallel to reduce the total time, and the reconstructions are dynamically adjusted to express different parts of an object. Optical experiments verify that the proposed method can holographically reconstruct the surface and interior information of objects.

A novel see-through virtual retina display (VRD) system is proposed in this Letter. An optical fiber projector is used as the thin-light-beam source, which is modified from a laser scan projector by separating the laser sources and the scan mechanical structure. A synthetic aperture method is proposed for simple, low-cost fabrication of a volume holographic lens with large numerical aperture. These two key performance-enhanced elements are integrated into a lightweight and ordinary-glasses-like optical see-through VRD system. The proposed VRD system achieves a weight of 30 g and a diagonal field of view of 60°.

A distortion correction method for the elemental images of integral imaging (II) by utilizing the directional diffuser is demonstrated. In the traditional II, the distortion originating from lens aberration wraps elemental images and degrades the image quality severely. According to the theoretical analysis and experiments, it can be proved that the farther the three-dimensional image is displayed from the lens array, the more serious the distortion is. To analyze the process of eliminating lens distortion, one lens and its corresponding elemental image are separated from the traditional II. By introducing the directional diffuser, the aperture stop of the separated optical system changes from the eye’s pupil to the lens. In terms of contrast experiments, the distortion of the improved display system is corrected effectively. In the experiment, when the distance between the reconstructed image and lens array is equal to 120 mm, the largest lens distortion is decreased from 46.6% to 3.3%.

A 360° light field 3D display system is presented, which consists of a liquid crystal display, a novel triplet lenses array, and a holographic functional screen (HFS). The mapping relationship among pixels, 3D objects, and viewing positions are investigated. The aberration analysis of the single lens is carried out both in the simulation and the experiment, which shows that it cannot provide an excellent 3D image to the viewers. In order to suppress the aberrations, “the primary aberration theory” and “the damped least-squares method” are used for optical analysis and lens design. A 3D image with aberration correction can be viewed around the proposed display system.

A computer generated holographic stereogram based on the wavefront recording plane (WRP) is presented. A WRP closed to the parallax image plane is introduced to record the complex amplitude in a small region for each point in the parallax image. By using three times of fast Fourier transform (FFT) to execute the Fresnel diffraction calculation between the WRP and the holographic stereogram plane, the object wave contributing to the hologram pattern can be achieved. The computation complexity of the proposed approach is dramatically reduced. The results show that the calculation time can be decreased by more than one order of magnitude.